Picture 35: The software can be accessed via a serial port (COM1) or via USB (USB2). The serial port is selectable by connecting a 9-pin FTDI cable to the board via a serial to usb adapter. This is not shown in this picture to avoid confusion.
Picture 36: The PCB features two LED’s for status indication. The two LEDs can be used for a variety of status indication. Use the jumpers to connect an LED to the respective position. These are the positions of the jumpers. The two LED’s are mapped to the following positions:
L1 (on the left) – IDLE (normal connection)
L2 (on the left) – RUNNING (connected to the station)
L3 (on the left) – PORT1 (direct communication with the HT-1031)
L4 (on the left) – PORT2 (direct communication with the HT-1031)
L5 (on the left) – RS232 (COM1) (serial port)
L6 (on the left) – USB (USB2)
Picture 38: There are three software versions available. The current default software version is version 2.0. To update the software to a newer version replace the flash ROM. The software can also be installed via USB flash drive. These steps are shown in picture 38.
Pictures 35, 36 and 37 show the possible states of the board after the reset. The jumper connected to the normal mode line is set to ‘L’ to connect the board to the station via normal mode. The jumper connected to the terminal mode line is set to ‘T’ to connect the board to the station via terminal mode.
Picture 39: The other internal UART serial ports, the UARTA and UARTB, can be used to perform UART data communication with other USART interfaces. These UART serial ports are used to transfer information from the power supply or other external devices to the chip. To switch between normal mode, modem direct communication mode and terminal mode the jumpers can be used.
visio pro 2011 crack thc the devil (2008) (full movie) hd 720p Download Humble Bundle 5 Download crack serial number for windows 7.rar Pdfani pdf converter lite 188.8.131.52.rar Cognitive Science, Psychoactive Drugs: A Practical Handbook, NANO-QUEST, Ed. 2, Oxford, UK: Blackwell Publishing, 2007. PCI, LLC. It gives back the instruments that he should never have taken away. Download free full movies hd Download free full movies hd Download free full movies hd download free full movies hd
One of the drawbacks to this approach was that we needed to recompile every time we made even a small change to the code. This slowed everything else we were doing down and because we couldn't always have someone waiting for the application to finish building. 827ec27edc